Electrolux Power Nozzle for Twinclean, Oxygen & Oxy3 Vacuum Cleaners (1131400648)

Power nozzle to suit Electrolux Twin Clean vacuums plus some Oxygen and Oxy3 models

Availability: In stock

$169.94
  • Buy 3 for $162.94 each and save 5%
  • Buy 5 for $158.94 each and save 7%
OR

Electrolux Power Nozzle for Twinclean, Oxygen & Oxy3 Vacuums (1131400648)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Electrolux Power Nozzle for Twinclean, Oxygen & Oxy3 Vacuums (1131400648)
  • Electrolux Twinclean, Oxygen & Oxy3 Vacuum Power Nozzle (1131400648)
  • Electrolux Power Head for Twinclean, Oxygen & Oxy3 Vacuum Cleaners (1131400648)
This Product:
  • For Electrolux vacuums
  • Single power nozzle
  • Operates only with your Electrolux powered rod and powered hose
  • Genuine Electrolux vacuum attachment for superior quality
  • 1104g package weight
  • Replace when needed
  • Suits all Electrolux Twinclean, Oxygen Plus and Oxy3 vacuums that were kitted with this particular power head
  • Replaces Electrolux Power Nozzle Part No 1131400549

This Product Suits:

  • Twin Clean Z8240, 8240
  • Twin Clean Z8245, 8245 
  • Twin Clean Z8280, 8280
  • Oxygen Plus Z7350, 7350
  • Oxygen Plus Z7351, 7351
  • Oxy 3 ZO6350, 6350 (ONLY serial numbers that start with 513 or greater) 
  • Oxy 3 ZO6330 (ONLY serial numbers that start with 513 or greater)

Machines which where made earlier than this (serial number starting with a number less than 513) had a slightly larger rod size which means the new powerheads do not fit. If you have a lower serial number eg 498 xxx xxx then you need to buy a complete sumo kit which has powered hose, rod and powerhead.

More Products for Your Vacuum:

Look at some of the additional items we carry for your Electrolux Twinclean:

**Vacuumspot carry a full range of Vacuum Hoses, Rods and Hose Parts for your Electrolux vacuum

 VacuumSpot is an Authorised Electrolux Agent


Customer Reviews

Electrolux Power Nozzle for Twinclean, Oxygen & Oxy3 Vacuum Cleaners (1131400648)
Great service
Within hours of ordering the part of the web site I got a response from vacuumspot, fantastic service and delivered in the time frame allocated, well done (Posted on 11/01/17)
Review by Wayter
Great vacuum
We have had this vacuum for over 10 years now, it has never missed a beat, suction is as good as from the 1st day we had bought it. Would buy another one the same if needed. Would highly recommend Electrolux vacuum cleaners (Posted on 11/01/17)
Review by Wayter
Easy to order and delivery prompt
Great service and delivery was prompt. My vacuum is working like new. Love the Electrolux product and was ecstatic that parts were available to bring it back - works like a charm now. Very happy outcome. Thanks
(Posted on 18/10/16)
Review by Deb

Add Your Question

Hello, I have an Electrolux Vacuum cleaner model - Z8240 serial number 80200392 ..
I have had the motor replaced a while back but am now having trouble with the head I think..
I have dog hair in the house and lots of it..and all the hair is just clogging up at the bottom of the brush and not rotating around the brush...Im not sure if I need the the new power head & a new power rod too... how can I tell if i need both?
Hi Alli,
If you look at the YouTube channel of ours named VacuumSpot you will see I have made some videos showing how to test the twin clean head to see if it is the rod or the head that is faulty. Basically you can put the head directly on the handle and if it still cuts in and out then it rules out the rod. If it runs well when it is attached to the hose then you need to replace the rod. I will email you the links to look at.
Regards
Alec
I have an Oxy3 System (E/Z06350) purchased in 2005. As it has been a reliable good vacuum, not long ago when it stopped working, I paid quite a lot to have it repaired at an authorised Electrolux dealer. But this week my power nozzle broke in two places, and cannot be repaired. I see that the power nozzle you are selling here is only suitable for units with serial numbers beginning 513 - and my serial number is 52200907. Is there a power nozzle available that is suitable for my vacuum? Or is there a standard non-motorised nozzle available that I could use with this vacuum?
Hi Carol, Actually we only changed that listing yesterday and it is supposed to say all serial numbers AFTER and including 513 so this power nozzle you have found is exactly the right one for your vacuum.
Regards
Alec
Can you supply the middle section (the powered head and handle are working but the middle section is faulty) for an Electrolux Cyclonic vacuum cleaner Model No ZUA3861P - Ultra Active Power 2100 watt - can you supply. If so- please advise cost, time involved and postage to Blayney NSW 2799. Unable to get satisfactory service from local service agent. Many thanks
Hi Yvonne,
Sorry for delay in reply I have had a surgery and limited work hours due to recovery :(
WE certainly have the rod you are after part number 2193841117 at this minute we have one in stock but stock levels change all the time. At worst there would be a couple of days delay to reorder. Delivery to Blayney would be $8.45 it would take 2-3 days in transit via Australia Post E-Parcel with online track and trace.
Regards
Alec
Can you supply the middle section (the powered head and handle are working but the middle section is faulty) for an Electrolux Cyclonic vacuum cleaner Model No ZUA3861P - Ultra Active Power 2100 watt - can you supply. If so- please advise cost, time involved and postage to Blayney NSW 2799. Unable to get satisfactory service from local service agent. Many thanks
Hi Yvonne,
Sorry for delay in reply I have had a surgery and limited work hours due to recovery :(
WE certainly have the rod you are after part number 2193841117 at this minute we have one in stock but stock levels change all the time. At worst there would be a couple of days delay to reorder. Delivery to Blayney would be $8.45 it would take 2-3 days in transit via Australia Post E-Parcel with online track and trace.
Regards
Alec
Hi
I am looking for a replacement floor tool for my Electrolux vacuum cleaner model ZO6330.
do you sell any original or compatible parts to replace it? Thank you lucy
Hi Lucy,
we certainly can supply the parts for your ZO6330 Electrolux. Most of the common parts are the same as the Electrolux Twin Clean.

According to my sheet the ZO6330 used a non powered head. The correct normal floorhead is part number 1131401547.

A common question is weather you can add a power head to a machine that did not originally come with one. The unfortunate answer is no it is not possible.

If you have any other enquiries please don't hesitate to contact us.
Regards
Alec

Hi,

I am looking for a replacement head for my electrolux vacuum however my model Z8220 obviously older then the ones you have mentioned. Would this still be compatible? At present I don't have a motorised head but have heard they are good, however looking over the questions, maybe they are more suited to carpet than floorboards?
Hi There,
Ok so I will answer your questions individually.
First the Z8220 did not come with a powered hose and the vacuum does not have a power outlet to support a powered hose or power head. So unfortunately this means you cannot purchase or adapt a powerhead to suit your vacuum.
The motorised head certainly is an improvement on carpets but for hard floors a powerhead will not be as good as a normal non powered version.
You can however attach an air driven head called a turbo or turbine depending on who you talk to. The part number of the turbo head to suit a Z8220 is 2192142079.
The head that is best for all round general cleaning on carpet and hard floors for your machine is part number 1131401547
If you have any other questions don't hesitate to ask.
Regards
Alec
Hi, Do you have the power head in stock for Electolux Twinclean Z8240.

Regards
Suzann Stein
Hi Suzann,
We have 1 left at the moment and due for more stock on Wednesday. If you order now you will get immediate shipping.
Regards Alec
what is the difference between powerhead 1131400648 and 2122142079?
HI there,
In all honesty nothing.
There used to be a slight colour difference.
The only reason we leave both listings up is because some people find one and some find the other. It is basically a search engine thing. Buy the cheaper one.
Happy Vacuuming
do you have these power heads in stock.to suit electrolux z8240
Hi There,
These Powerheads have run out at the supplier about 2 months ago. We have been able to sell them up until 2 weeks ago because we had a large inventory but even we have run out now. The new stock is due to arrive in the first week of June. You can secure one for yourself by placing an advance order. All orders will be dispatched the same day as we receive stock.