Dyson V10, V11 Vacuum Motorhead Brush Bar Assembly 3-Pin (969569-01)
Dyson V10, V11 Vacuum Motorhead Brush Bar Assembly 3-Pin (969569-01)
Genuine Dyson V10, V11, SV12, SV14 3-pin Brush Bar assembly with end cap - 240mm Brush Width
This Product Suits:
- Dyson V10, V11 Cordless Vacuums (Models: SV12, SV14)
- Dyson V12 Detect Slim (Model: SV20)
- Some Dyson Outsize models that use the smaller (less wide) motorhead. This roller brush will not fit the wider Dyson V11 Outsize motorheads which use a 305mm wide brush.
Please Note: This roller brush has 3 pins as shown in the product images. Some of the older V10 models have a different brush (with 4 pins). Please compare your brush with the images on this listing. If your brush looks different please contact us before purchasing it
This Product:
- Genuine Dyson V10, V11, SV12, SV14 Brush Bar (Roller Brush) assembly with end cap
- 3-pin roller brush (see notes below for compatibility)
- Original replacement Dyson part for your V10 cordless vacuum cleaner
- The bristles on the Dyson V10 roller brush are most important to enable a good pick-up on carpet and hard floor. Therefore we recommend to check your roller brush once a year and replace if needed.
- The V10 stickvac brushbar comes off very easily so you will not find it difficult to replace it
- Brush Width: Approximately 240mm
- Please ensure that you measure the width of your existing roller brush to ensure this is the correct size for your motorhead
- Replaces Dyson part number: 972500-01
Special Notes:
- This roller brush has 3 pins as shown in the product images. Some of the older V10 models have a different brush (with 4 pins) and this brush will not fit those motorheads. Please compare your brush with the images on this listing before purchasing. The 4-pin brush is no longer available.
- This roller brush will not fit the wider Dyson V11 Outsize motorheads which use a 305mm wide brush.
Brands | Dyson |
---|---|
Part Type | Brushes |
This product suits
This Product Suits:
- Dyson V10, V11 Cordless Vacuums (Models: SV12, SV14)
- Dyson V12 Detect Slim (Model: SV20)
- Some Dyson Outsize models that use the smaller (less wide) motorhead. This roller brush will not fit the wider Dyson V11 Outsize motorheads which use a 305mm wide brush.
Please Note: This roller brush has 3 pins as shown in the product images. Some of the older V10 models have a different brush (with 4 pins). Please compare your brush with the images on this listing. If your brush looks different please contact us before purchasing it
Information
This Product:
- Genuine Dyson V10, V11, SV12, SV14 Brush Bar (Roller Brush) assembly with end cap
- 3-pin roller brush (see notes below for compatibility)
- Original replacement Dyson part for your V10 cordless vacuum cleaner
- The bristles on the Dyson V10 roller brush are most important to enable a good pick-up on carpet and hard floor. Therefore we recommend to check your roller brush once a year and replace if needed.
- The V10 stickvac brushbar comes off very easily so you will not find it difficult to replace it
- Brush Width: Approximately 240mm
- Please ensure that you measure the width of your existing roller brush to ensure this is the correct size for your motorhead
- Replaces Dyson part number: 972500-01
Special Notes:
- This roller brush has 3 pins as shown in the product images. Some of the older V10 models have a different brush (with 4 pins) and this brush will not fit those motorheads. Please compare your brush with the images on this listing before purchasing. The 4-pin brush is no longer available.
- This roller brush will not fit the wider Dyson V11 Outsize motorheads which use a 305mm wide brush.
Brands | Dyson |
---|---|
Part Type | Brushes |