Wertheim 4030, 5030, 5035, 6030, 3030T, ET2000P, 3280 Powerhead Brush (PHCS-ROLLER)
Wertheim 4030, 5030, 5035, 6030, 3030T, ET2000P, 3280 Powerhead Brush (PHCS-ROLLER)
Powerhead rollerbrush for Wertheim 4030, 5030, 5035, 6030, 3030T, ET2000P & 3280 vacuums
This Product Suits:
- Wertheim - Tornado, PB007, PB12, Whirlwind, AU1365 Powerhead
- Cleanstar - PHCS, PV-PHCS Powerhead
These powerheads are most frequently fitted to these Wertheim vacuum cleaners:
- W5030, 5030, W5035, 5035, W6030, 6030, W3030T, ET2000P, W3280, 3280, W4030, 4030, W4412, 4412
NOTES:
- Please ensure that this rollerbrush will fit your vacuum powerhead by confirming the model number of the powerhead first (PB007, AU1365, Tornado, Whirlwind and PHCS)
- Note: The toothed brush bar has been discontinued for quite some time. You can use the toothed end cap from your old roller brush on this roller brush for compatibility. There is a nut on the end, remove the nut and the end cap will come off, then just swap them over.
- For various Wertheim and Cleanstar powerheads
- Single powerhead rollerbrush
- Comes complete with bearings for no fuss installation
- Non-toothed belt compatible
- Replace when required
- Equivalent to Vacspare part no: 33701082
Note: The toothed brush bar has been discontinued for quite some time. You can use the toothed end cap from your old roller brush on this roller brush for compatibility. There is a nut on the end, remove the nut and the end cap will come off, then just swap them over.
| Brands | Cleanstar, Wertheim |
|---|
This product suits
This Product Suits:
- Wertheim - Tornado, PB007, PB12, Whirlwind, AU1365 Powerhead
- Cleanstar - PHCS, PV-PHCS Powerhead
These powerheads are most frequently fitted to these Wertheim vacuum cleaners:
- W5030, 5030, W5035, 5035, W6030, 6030, W3030T, ET2000P, W3280, 3280, W4030, 4030, W4412, 4412
NOTES:
- Please ensure that this rollerbrush will fit your vacuum powerhead by confirming the model number of the powerhead first (PB007, AU1365, Tornado, Whirlwind and PHCS)
- Note: The toothed brush bar has been discontinued for quite some time. You can use the toothed end cap from your old roller brush on this roller brush for compatibility. There is a nut on the end, remove the nut and the end cap will come off, then just swap them over.
Information
- For various Wertheim and Cleanstar powerheads
- Single powerhead rollerbrush
- Comes complete with bearings for no fuss installation
- Non-toothed belt compatible
- Replace when required
- Equivalent to Vacspare part no: 33701082
Note: The toothed brush bar has been discontinued for quite some time. You can use the toothed end cap from your old roller brush on this roller brush for compatibility. There is a nut on the end, remove the nut and the end cap will come off, then just swap them over.
| Brands | Cleanstar, Wertheim |
|---|